1/6

1.Rest the VFOLD door upright on the floor positioned ready for installation.

2/6

2.Fit the bearing set into the 12x16mm square hole at the base of the frame.

3/6

3.Insert the runner into the top rail by inclining the door panel by 60 degress and then bring it upright.

4/6

4.Use screw driver or steel bar with a diameter less than 4mm.Insert it into the black slot beside the rotating shaft of the VFOLD’s initial state.

5/6

5.Use the tool to slide the rotating shaft out into the round fixing hole in the top of the frame.

6/6

6.Once installed, the VFOLD door can be opened and shut smoothly.